Remote Compass Module: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Volkswagen Routan, 2013 Volkswagen Routan, 2012 Volkswagen Routan, 2011 Volkswagen Routan, and 2010 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.
-- Position the Remote Compass Module (RCM) (2) onto the top of the Instrument Panel (IP).
-- Install the RCM retaining screws (3).
-- Connect the electrical connector (1).
-- Install the instrument panel top cover / defroster grille. Refer to Removal and Installation .
-- Connect the negative battery cable.
NOTE:
If the RCM has been replaced for any reason the Manual Compass Calibration and Compass Variance procedures will need to be performed. Refer to COMPASS AND MINI-TRIP COMPUTER, COMPASS VARIANCE ADJUSTMENT and COMPASS AND MINI-TRIP COMPUTER, MANUAL COMPASS CALIBRATION .
-- Verify the compass operation.