B1009 - Recirculation Switch Request Input Circuit/Performance: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Volkswagen Routan, 2013 Volkswagen Routan, 2012 Volkswagen Routan, 2011 Volkswagen Routan, and 2010 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.
For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS information.
Theory of Operation
The switch input changes when the switch is pushed down. A stored DTC indicates that the recirculation switch was stuck in a pushed position for more than 10 minutes, but has since returned to its normal state. An active DTC indicates that the recirculation switch is stuck in a pushed position.
- >>When Monitored:<< With the ignition on.
- >>Set Condition:<< If the recirculation switch is detected in a pushed position for more than 10 minutes.
| Possible Causes |
|---|
| OBJECT HOLDING RECIRCULATION SWITCH IN A PUSHED POSITION |
| SUBSTANCE CAUSING PANEL MODE SWITCH TO GET STUCK IN A PUSHED POSITION |
| A/C HEATER CONTROL |