B2846 - Driver Blind Spot Warning Light Control Circuit Low: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Volkswagen Routan, 2013 Volkswagen Routan, 2012 Volkswagen Routan, 2011 Volkswagen Routan, and 2010 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.
For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAM.
- >>When Monitored:<< Continuously.
- >>Set Condition:<< When the driver blind spot indicator circuit senses that the voltage is below 4.0 volts for over 155 ms., this code will set.
| Possible Causes |
|---|
| DRIVER MIRROR ASSEMBLY |
| DRIVER DOOR MODULE (DDM) |