Removal And Installation
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Using the special tool, remove the audio unit.
- Disconnect the electrical connectors and the antenna lead-in cable.
- To install, reverse the removal procedure.
- Enter the 4-digit key code.
CAUTION:
After battery power has been removed from the audio unit, the 4-digit key code must be entered when the audio unit is powered up. If the key code is entered incorrectly 3 times, the audio unit will be permanently disabled.