Test Step 3 - (Q94) LIFTGATE CHIME DRIVER CIRCUIT OPEN

Fig 1: Liftgate Chime Driver Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Turn the ignition off.
• Disconnect the Power Liftgate Chime harness connector.
• Measure the resistance of the (Q94) Liftgate Chime Driver circuit between the PLG C2 connector and the Chime connector.

Is the resistance below 5.0 Ohms?

Yes

• Go to Test Step 4 Test Step 4 - (Z910) GROUND CIRCUIT OPEN 

No

• Repair the (Q94) Liftgate Chime Driver circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .