ATF Level, Checking And Filling: Filling
- Place the Used Oil Collection and Extraction UnitSMN372500 or drip tray for VAS 6100VAS 6208 under the transmission.
-- Install and tighten the adapter for filling ATF oil VAS 6262/2 into the plug hole hand tight with the engine running.
-- Shake the container before opening it.
The ATF filler tool must be clean and the ATF must not be mixed with any other ATF.
Allocation.
-- Attach the adapter for oil filling VAS 6262 A to the fluid container. Be sure to read the instructions. Refer to Note the following information: .
-- Fill with 1 liter Automatic Transmission Fluid (ATF).
-- Connect the adapter for oil filling VAS 6262 to the quick release coupling and check the fluid:
If ATF drains out of the hole:
The ATF does not need to be topped off.
-- Allow the ATF to drain until it drips.
-- Reinstall and tighten the ATF plug with new seal to 27 Nm. The ATF level test is now completed.
If ATF does not drain out:
-- Fill another liter of fluid. Refer to FILLING .
Too little or too much ATF will impair the transmission. If 2 liters are missing, you should check the transmission more closely. There is probably a larger leak.