Service Interval Display, Coding At The First Oil Change (For USA And CANADA)

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Switch on the ignition.

-- Press: "OBD" on the touch screen.

NOTE:

If the displays indicated in the procedure are not shown on the display. Refer to Operating instructions for Vehicle Diagnostic Tester or Vehicle Diagnostic Tester.

-- Select the following one after the other:

Brand
Type
Model year
Engine code

-- Confirm the VIN.

If the vehicle identification procedure was performed correctly, press > button for confirmation.

-- Select the following one after the other:

17 "Instrument Cluster" -ARROW-.

Fig 1: Diagnosis System Display: 17 - Instrument Panel Insert
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
10 "Adaptation"

-- Select channel 49.

-- Enter 372.

-- Select channel 42.

-- Perform adaptation according to instructions of "ON BOARD DIAGNOSTICS (OBD)".

NOTE:

The following applies to USA and Canada vehicles:

Channel 42: 100 (= 10, 000 miles) for USA

Channel 42: 160 (= 16.000 km) for CDN

Channel 49: 372 (= 372 days) for USA and CDN

Ending the Adaptation:

Indicated on display:

Fig 2: Identifying "Go To" Button On Scan Tool Display

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the Go to button -arrow- on display.

Indicated on display:

Fig 3: Identifying "Exit" Button On Scan Tool Display

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the End button -arrow- on the display.

-- Turn off the ignition and disconnect the diagnostic connector.