LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2011 >> Jetta Base >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Procedures (Sedan) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Battery Terminals, Checking For Secure Seating >> Battery In Engine Compartment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Battery In Engine Compartment

Special tools and workshop equipment required 

NOTE:

Tight battery connections assure trouble-free battery function and long service life.

Make sure the terminal clamp is attached completely to the battery pole.

Perform the following procedure: 

-- Open the batter cover, if equipped.

Fig 2: Identifying Direction To Open Battery Cover
GWWN01-10631Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the positive and negative battery terminals back and forth to make sure they are securely attached.

Fig 3: Moving Battery Terminals Back And Forth
GWWN01-10632Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
WARNING:

If battery positive (B+) connection is loose, disconnect ground (GND) cable first before attempting to remove or tighten plus connection, to prevent personal injury.

If the battery clamp on positive terminal is NOT seated securely:

-- Loosen and remove the -MINUS- battery terminal.

Fig 4: Identifying Removal Of -Minus- Battery Terminal
GWWN01-10685Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the -PLUS- battery terminal to 6 Nm using Torque Wrench 5-50 Nm V.A.G 1331 and Torque Wrench 1331 Insert - Reversible Ratchet V.A.G. 1331/1.

Fig 5: Identifying Torque Wrench Vag 1331 To Tighten -PLUS- Battery Terminal
GWWN01-10686Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Connect and tighten the -MINUS- battery terminal to 6 Nm using Torque Wrench 5-50 Nm V.A.G 1331 and Torque Wrench 1331 Insert - Reversible Ratchet V.A.G. 1331/1.

Fig 6: Connecting/Tightening -MINUS- Battery Terminal Using Torque Wrench V.A.G 1331 And Reversible Ratchet V.A.G. 1331/1
GWWN01-10687Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If ground connection on battery terminal is NOT tight:

-- Tighten the -MINUS- on the battery terminal to 6 Nm using Torque Wrench 5-50 Nm V.A.G 1331 and Torque Wrench 1331 Insert - Reversible Ratchet V.A.G. 1331/1.

Fig 7: Connecting/Tightening -MINUS- Battery Terminal Using Torque Wrench V.A.G 1331 And Reversible Ratchet V.A.G. 1331/1
GWWN01-10687Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the cover, if equipped.

Fig 8: Identifying Direction To Close Battery Cover
GWWN01-10633Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Once the battery is reconnected. Refer to Removal and Installation "Battery, Connecting/Steps After Connecting Battery".