Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
| Component |
Fastener Size |
Nm |
| Ball Joint to Control Arm Nut |
| - Cast Steel Control Arm |
- |
60 |
| - Steel and Aluminum Control Arm |
- |
100 |
| Coupling Rod to Stabilizer Bar Nut |
- |
65 |
| Knee Airbag Mount to Steering Column Bolt |
- |
9 |
| Pendulum Support to Transmission Bolt |
- |
50 + 90° turn |
| Shield to Steering Gear Bolt |
- |
6 |
| Stabilizer Bar to Subframe Bolt |
- |
20 + 90° turn |
| Steering Column to Assembly Carrier Bolt |
- |
20 |
| Steering Column to Steering Gear Bolt |
- |
30 |
| Steering Gear to Subframe Bolt |
- |
50 + 90° turn |
| Subframe to Body Bolt |
- |
70 + 90° turn |
| Tie Rod to Steering Gear |
- |
100 |
| Tie Rod End to Tie Rod Nut |
- |
70 |
| Tie Rod End to Wheel Bearing Housing Nut |
- |
20 + 90° turn |