USB Connection BASEPLATE -R193-

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

The USB connection baseplate is located inside the center armrest.

Removing

CAUTION:

-- Open the center armrest.

-- Remove any data storage devices and their wire connections.

-- Insert the 3316 into the slots -arrows- on the USB connection baseplate.

Fig 1: Identifying Storage Compartment With USB Connection Removal Slots

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The USB connection baseplate is illustrated as removed for purposes of clarity.

-- Press the 3316 apart in -direction of arrow-. Remove the USB connection baseplate from the center armrest using 3316.

Fig 2: Identifying Locking Mechanism

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector from the USB connection baseplate.

-- Press the spring on the USB connection baseplate in -direction of arrow- and, at the same time, remove the 3316 in -direction of arrow A-.

Fig 3: Identifying Direction To Push Spring On Removed Insert And Pull Extracting Tool Out In

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

-- Insert the USB connection baseplate into the center armrest. The USB connection must in the back.

Install in reverse order of removal.