IPOD BASEPLATE -R192- Adapter

WARNING: This page is about a different variant/trim than selected.

In order to adapt the baseplate for different iPod sizes, there is an adapter for the iPod baseplate.

Installing

iPod and iPod Photo:

-- Insert adapter -A- in -direction of arrow- into mount -B- to stop.

Fig 1: Identifying Adapter Inserted To Stop

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The adapter -A- is available in various thicknesses. To find out which one is needed, refer to the Operating Instructions.

iPod Mini:

-- Insert the adapter into the iPod baseplate in -direction of arrow-.

Fig 2: Identifying Adapter Inserted Into Cradle To Stop

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Removing

Remove in reverse order of installation.