Amplifier -R12-
WARNING: This page is about a different variant/trim than selected.
The amplifier is under the left front seat.
Removing
CAUTION:
- Turn off the ignition and all electrical consumers.
- Remove the key.
-- Move the left front seat into its highest position and the move it all the back.
-- Remove the lower cover -arrow- from the seat.
-- Remove the screws -arrows- from the amplifier.
-- Remove the amplifier just far enough until the connectors are accessible.
-- Disconnect the connectors from the amplifier -arrows-.
-- Remove the amplifier.
Installing
-- Make sure the amplifier slides into the notch on the bracket correctly when installing.
Install in reverse order of removal.
Torque specifications: 6 Nm