Windshield Wiper System Overview

Fig 1: Identifying Windshield Wiper System Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Nut 
   • 20 Nm
2. Windshield Wiper 
   • Removal and installation, refer to JOINT-FREE WIPER BLADES, FRONT .
   • Adjusting park position, refer to WINDSHIELD WIPER BLADES, ADJUSTING PARK POSITION .
3. Wiper Arms 
   • Removal and installation, refer to WINDSHIELD WIPER ARMS .
4. Screw 
   • 8 Nm
5. Wiper Frame With Linkage 
   • Removal and installation, refer to DISCONNECT THE CONNECTOR -1- .
6. Windshield Wiper Motor -V- with Wiper Motor Control Module -J400- 
   • For removing and installing wiper frame, refer to WINDSHIELD WIPER MOTOR -V- .
   • Wiper Motor Control Module -J400- Coding/Deactivating the APP Function, refer to WIPER MOTOR CONTROL MODULE -J400-, DEACTIVATING APP FUNCTION .
7. Rubber Grommet In The Bulkhead 
   • Note installation instructions, refer to WHILE INSTALLING, SECURING PIN -2- OF WIPER FRAME MUST BE INSERTED INTO GROMMET -1- ON BULKHEAD .

No Illustration 

• Windshield wiper motor -V- bolts to the wiper frame with linkage - 8 Nm
• Windshield wiper motor crank to windshield wiper motor shaft: 18 Nm