Windshield Washer Fluid Level Sensor -G33-

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Removal

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Remove the front bumper cover, refer to Description and Operation .

-- Release and disconnect the Windshield Washer Fluid Level Sensor -G33- connector -2-

Fig 1: Identifying Windshield Washer Fluid Reservoir And Windshield Washer Fluid Level Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the Windshield Washer Fluid Level Sensor -G33- -2- out of the rubber seal on the container -1-.

-- Catch any draining washer fluid in a suitable container.

Installation

Install in reverse order of removal.