Vehicle Positioning System Control Module: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Remove the right luggage compartment side trim panel. Refer to Removal and Installation .

-- Remove the screws -3- and remove the Vehicle Positioning System Control Module -J895- -1- with the bracket -2-.

Fig 1: Identifying Vehicle Positioning System Control Module With Bracket And Screws

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release and disconnect the connectors from the Vehicle Positioning System Control Module -J895- -1-.

-- Remove the Vehicle Positioning System Control Module -J895- -1- from the bracket -2-.