Chip Card Reader Control Module: Removing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition and all electrical consumers and remove the ignition key.
The Chip Card Reader Control Module -J676- -1- is inside the top of the glove compartment and glued either to the TV Card Reader -R204- or directly to the glove compartment trim panel.
-- Open the glove compartment.
-- Remove the chip card.
-- Loosen the Chip Card Reader Control Module -J676- with a small screwdriver.