Throttle Valve Control Module -J338-: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification, refer to OVERVIEW - INTAKE MANIFOLD

NOTE:

Replace seals, and O-ring after removing.

-- When installing the connection with the Throttle Valve Control Module - J338-, pay attention to the alignment pins.

-- Install the front upper coolant pipes, refer to OVERVIEW - COOLANT PIPES .

-- Install the air filter housing, refer to AIR FILTER HOUSING .

-- Install the engine cover, refer to ENGINE COVER .