Engine Control Module -J623- With Protective Housing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the air filter housing, refer to AIR FILTER HOUSING .

-- Remove the E-box cover inside the engine compartment -arrows-.

Fig 1: Identifying Engine Control Module (E-Box) Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the wiring harness and pull engine control module upward out of its mount. Push the locking mechanism -arrows- to the side.

Fig 2: Locating Locking Mechanisms

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -A-. Push the wiring harness as far as possible to the side. Remove the locking mechanism -B-.

Fig 3: Locating Wiring Harness And Locking Mechanism

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unlock the connector and pull it off the engine control module.