Display Control Head (CLIMATRONIC): Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal.

NOTE:

If the Front A/C Display Control Head -E87- and the Climatronic Control Module -J255- are replaced, reset the "A/C compressor, first break-in" using the Vehicle Diagnostic Tester under "Guided Functions".

Then "Replace the climatronic control module".