Windshield Overview, Convertible
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Windshield
- Removing and Installing, refer to WINDSHIELD .
- PUR Adhesive Sealant
- Bead cross section: -Width b- = 6.5 mm -Height a- Height = 10 mm (including the the precoating, residual material on the window and the window flange)
- Minimum curing time, refer to MINIMUM CURING TIME FOR BONDED WINDOWS .
- Body Flange
- Paint damage, repairing, refer to BODY FLANGE, PREPARING FOR INSTALLATION .
- Gap Dimension
- Must be the same on the left and right sides
- Gap Dimension
- Must be even
- Window Adjuster
- 443 845 631 A
- Retainer
- is a part of the windshield
- Plenum Chamber Cover
- Must only be pulled out of binding profile by hand.
- Removing and installing, refer to PLENUM CHAMBER COVER .
- Adhesive Bead End
- Apply the adhesive bead in this area