Door Components Overview

Door Components

Fig 1: Identifying Door Components Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Cover
   • Without lock cylinder.
   • Removing and Installing, refer to Installing .
2. Cover
   • With lock cylinder.
   • Removing and Installing, refer to LOCK CYLINDER CAP .
3. Backing
4. Lock Cylinder
   • Only on the driver side
   • Removing and Installing, refer to LOCK CYLINDER .
5. Door Handle
   • Removing and Installing, refer to DOOR HANDLE .
6. Bracket
   • Removing and Installing, refer to BRACKET .
7. Cable
   • From the bracket -6- to the door lock -15-
8. Outer Window Shaft Seal
   • Removing and Installing, refer to OUTER WINDOW SHAFT STRIP .
9. Door Window
   • Removing and Installing, refer to FRONT DOOR WINDOW .
10. Door
    • Removing and Installing, refer to DOOR .
    • Adjusting, refer to DOOR, ADJUSTING .
11. Bolt
    • Quantity: 2
    • Tightening specifications, refer to DOOR ARRESTER 
12. Door Arrester
    • Removing and Installing, refer to DOOR ARRESTER .
13. Speaker
    • Riveted to the door
14. Outer Covering
    • Installed depending on the market. For allocation, refer to appropriate service information.
    • Removing and Installing, refer to OUTER COVER .
15. Cover
    • Removing and Installing, refer to DOOR INNER COVER .
16. Door Lock
    • Removing and Installing, refer to DOOR LOCK .
17. Bolt
    • Quantity: 2
    • Tightening specifications, refer to OVERVIEW - DOOR HANDLE AND DOOR LOCK .
18. Inner Window Recess Seal
    • A part with outer door seal
    • Removing and Installing, refer to OUTER DOOR SEAL .

Noise Insulation

Fig 2: Identifying Noise Insulation Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Foam Piece
   • Clipped to the door
2. Cover Caps
   • There are different versions. Allocation, refer to appropriate service information.
3. Sticker
   • Use electrical tape if needed
4. Insulation
   • Self-adhesive
   • Installing:

     -- Cut to size if necessary, 250 mm x 160 mm

     -- Warm and then press firmly onto the outer door panel. Use Hot Air BlowerVAG1416.

5. Outer Covering
   • Installed depending on the market. For allocation, refer to appropriate service information.
6. Foam Piece
   • Installing:

     -- Cut to size if necessary, 60 mm x 30 mm