Subframe Mount, Checking Adjustment: Procedure

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

The following dimensions must be attained:

Fig 1: Identifying Distance And Dimension

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The distance -a- between the engine support -2- and the engine mount -1- must be 10 mm (0.393 inch).
The casting edge on the engine support must be parallel to the support arm

NOTE: Distance -a- = 10 mm (0.393 inch) can also be checked with corresponding round stock.

-- The distance measured is too small or too large, adjust the subframe, refer to SUBFRAME MOUNT, ADJUSTING .