Vehicle Electrical System Control Module -J519-

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

It is permissible for the number of connectors to deviate from the illustration, depending on the vehicle variants.

Removal

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Remove the footwell cover on the driver side, if equipped.

The Vehicle Electrical System Control Module -J519- is locked to the front of the relay panel on the bottom.

-- Press the catches -arrows- and swivel the Vehicle Electrical System Control Module -J519- downward.

Fig 1: Identifying Vehicle Electrical System Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the Vehicle Electrical System Control Module -J519- downward and opposite the drive direction and remove it from the bracket.

-- Disconnect the connectors.

Installation

Install in reverse order of removal. Note the following:

-- Insert the Vehicle Electrical System Control Module -J519- first with the back of the module into the bracket and push it up until it audibly latches.