Safety Precautions
To reduce the risk of personal injury and/or damage to the fuel injection and ignition system, always observe the following:
- Do not touch or remove the ignition coil or the ignition wires when engine is running or turning at starter speed.
- Only disconnect and reconnect wires for injection and ignition system, including test leads, if ignition is turned off.
If engine is to be cranked at starting RPM without starting:
-- Disconnect the connector -arrow- from the ignition coil.
If special testing equipment is required during road test, note the following:
- Testing and measuring equipment must always be secured to the rear seat and be operated from there by a second person.
If the vehicle is involved in a collision while testing and measuring equipment is operated from the front passenger seat, the person sitting in that seat could be seriously injured when the airbag deploys.