Towing Recognition Control Module -J345-, Coding

Special tools and workshop equipment required 

• Trailer Socket Tester VAS 5800
• Power Outlet Tester V.A.G 1537/A
• Vehicle Diagnostic Tester

This test program is used to code the towing recognition control module.

-- Connect the Vehicle Diagnostic Tester. Refer to Description and Operation .

-- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".

-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body
• Body repair procedures
• Towing sensor
• Functions
• Coding Control Module for towing sensor