Removal And Installation: Transmission: Notes
Special tools and workshop equipment required
- Engine Support Bridge 10-222 A
- Engine Support Feet 10-222 A/8
- Adapter 10-222 A/18
- Adjustment Plate 3282/39
- Support Elements (determine when mounting the adjustment plate on the transmission support)
- Transmission Support 3282
- Plate T10419
- Shackle 10-222 A/12
- Engine-/Gearbox Jack V.A.G 1383 A
- Support T10036 A or T10036
- Torque Wrench (40-200 Nm) V.A.G 1332
- Engine Support Device 3300 A
- Torque Wrench (5-50 Nm) V.A.G 1331
- Transmission Support Jig 3336
- Grease for Clutch Plate Splines G 000 100
- M6 x 20 Hex Socket Head Bolt (Qty: 2)
- M6 x 80 Bolt
-- If using the support T10036, drill two 7 mm holes as illustrated.
- -a- = 11 mm
- Dimension -b- = 98 mm
- Dimension -c- = 70 mm
The engine support bridge 10-222 A and the engine support feet 10-222 A/8 will be mounted on the longitudinal members later in the procedure.
- To protect the edges of the fenders, cover both engine support feet10-222 A/8 with cloth tape -arrow-.