Gear Shift Unit

Special tools and workshop equipment required 

• Thrust Piece T10203
• Sleeve VW 423
• Torque Wrench (5-50 Nm) V.A.G 1331

Fig 1: Identifying Locking Pin Removed From Shift Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the outer part of the locking pin.

-- Then carefully pry out the locking pin with a screwdriver.

Fig 2: Identifying Locking Pin Pressed In Into Shift Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installed position: 

The mark -arrow- faces toward the upper part of the gear shift shaft.

Fig 3: Identifying Sealing Ring Driven In To Stop

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.