Cornering Lamp and Headlamp Range Control Module (J745)

Cornering Lamp and Headlamp Range Control Module (J745)

Removing

- Remove the glove compartment.

- Remove screws - arrows -.






- Remove the control module - 1 -. Pay attention to the wires still connected.

- Press the tab - arrow -, move the bracket - 1 - in - direction of arrow 2 - and disconnect the connector.






Installing

Install in reverse order of removal. Note the following:

• Code the new headlamp range/cornering lamp control module after installing it, refer to => [ Cornering Lamp and Headlamp Range Control Module (J745), Coding ] Testing and Inspection and then perform a basic setting on the headlamp.

- Check headlamp for function.

- Check the headlamp adjustment and adjust it if necessary.