Display and Control Unit, Electric Manual

Display and Control Unit, Electric Manual

• Perform the replace control module function, a basic setting and an adaptation "A/C compressor first start " either in Guided Fault Finding or in Guided Functions when installing a new A/C control module (J301).

•

Removing

- Remove the A/C and heater controls trim, (Golf 2009).






- Remove bolts- arrows - (1.5 Nm) and controls from the center console.

- Disconnect the connectors for the controls.

Installing

• Perform the replace control module function, a basic setting and an adaptation "A/C compressor first start " either in Guided Fault Finding or in Guided Functions when installing a new A/C control module (J301).

Installation is in reverse order of removal. Note the tightening specification 1.5 Nm for the screws.