Instrument Cluster, Replacing
WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
Work procedure "replace instrument cluster" contains the following scope of work:
- If a new instrument cluster is installed in the vehicle, the Instrument Cluster Control Module -J285- must be adjusted to the various equipment characteristics and corresponding version for that country.
- To adapt the integrated Anti-Theft Immobilizer Control Module -J362- with the Engine Control Module -J623-, it is necessary to save the data from the Engine Control Module -J623- in the replacement instrument cluster.
- Also, all ignition keys must be adapted after installation of a new instrument cluster.
-- Use the Vehicle Diagnostic Tester for instrument cluster adaptation/replacing.