Commercially Available Tools And Materials: Notes

CAUTION:

Non-approved tools or materials such as leak sealing additives can cause damage or malfunctions in the system.

Only use tools and materials approved by the manufacturer.

The warranty is voided if non-approved tools or materials are used.

NOTE:

This list outlines the testers, tools and materials required for expert refrigerant circuit repair work.

Overview	Page
A/C service station ROB 134APF, other A/C service stations, refer to V.A.G workshop equipment information.	A/C SERVICE STATION ROB 134APF (AND OTHER A/C SERVICE STATIONS)
Leak Detector V.A.G 1796	LEAK DETECTOR V.A.G 1796
Leak Detection System VAS 6196	LEAK DETECTION SYSTEM VAS 6196
Leak Detection Additive VAS 6196/1	Not illustrated
Leak Detection System VAS 6201	LEAK DETECTION SYSTEM VAS 6201
Service station with flushing equipment ROB 134APF or Service station with flushing equipment VAS 6337/1A. Refer to the Special Tools and Equipment Information for available A/C service stations. With installed program to flush refrigerant circuit with refrigerant R134a.	Not illustrated
Refrigerant Circuit Flushing Device VAS 6337/1 (flushing devices that can currently be delivered, refer to VAG workshop equipment information. For flushing refrigerant circuit with refrigerant R134a. To be used also with older A/C service stations (flushing procedure must then be performed manually) with a reservoir volume of at least 10 kg of refrigerant R134a.	REFRIGERANT CIRCUIT FLUSHING DEVICE VAS 6337/1 MADE BY BEHR OR SUCCEEDING MODEL
Refrigerant Circuit Flushing Device VAS 6336/1 (flushing devices that can currently be delivered, refer to VAG workshop equipment information. For flushing refrigerant circuit with refrigerant R134a. To be used also with older A/C service stations (flushing procedure must then be performed manually) with a reservoir volume of at least 10 kg of refrigerant R134a.	REFRIGERANT CIRCUIT FLUSHING DEVICE VAS 6336/1 MADE BY WAECO OR SUCCEEDING MODEL
VW/Audi passenger vehicle set adapter chest VAS6338/1 for refrigerant circuits with refrigerant R134a. For connecting the A/C service station to the refrigerant circuit and bridging certain components when flushing with refrigerant R134 or compressed air and nitrogen.	Not illustrated
Commercial vehicle set adapter chest VAS6338/50 for refrigerant circuits with refrigerant R134a. For connecting the A/C service station to the refrigerant circuit and for bridging certain components when flushing.	Not illustrated
Ultrasound A/C Cleaner VAS 6189A For eliminating unpleasant odors caused by A/C system.	Not illustrated
Pressure-fed spray gun V.A.G 1538 Spray nozzle VAG 1538/5 (short) Spray nozzle VAG 1538/6 (long) Spray nozzle VAG 1538/7 (700 mm, commercial vehicle) Cleaning solution D 600 100 A1 Cleaning solution for evaporator D 600 100 A2 To remove unpleasant odors from the evaporator	Not illustrated
Release Tools VAS 6127 case For opening refrigerant pipes.	THE RELEASE TOOLS VAS 6127 CASE CONSISTS OF THE RELEASE TOOL VAS 6127/1, RELEASE TOOL VAS 6127/2 AND RELEASE TOOL VAS 6127/3
Release Tools VAS 6127/1-3 For opening refrigerant pipes.	RELEASE TOOL VAS 6127/1 / RELEASE TOOL VAS 6127/2
Counterhold V.A.G 1616 For clutch plate (A/C compressor manufactured by Sanden).	COUNTERHOLD V.A.G 1616 FOR CLUTCH PLATE (FOR SANDEN A/C COMPRESSORS)
Puller V.A.G 1616/1 for A/C clutch (Sanden compressors).	PULLER V.A.G 1616/1 (FOR SANDEN A/C COMPRESSORS)
A/C clutch set V.A.G 1719 (Zexel compressors).	A/C CLUTCH SET V.A.G 1719 (FOR ZEXEL A/C COMPRESSORS)
Adapter set for refrigerant circuit V.A.G 1785/1-10 R134a.	ADAPTER SET V.A.G 1785/1-10
Combined fine filter unit for compressed-air system (oil, dirt and water separator as used for painting facilities). Refer to workshop equipment information.	Not illustrated
O-ring seals.	Not illustrated
Refrigerant oil.	Not illustrated
Socket T10364 for high pressure/low pressure side service connection valves on refrigerant circuit.	SOCKET T10364 FOR THE HIGH PRESSURE/LOW PRESSURE SIDE SERVICE CONNECTION VALVES IN THE REFRIGERANT CIRCUIT

Overview	Page
Fin comb	FIN COMB
Charging hoses 5/8" - 18 UNF with valve opener.	CHARGING HOSES
Connection piece for refrigerant cylinder and seal with quick-release coupling connection or threaded connection 5/8" - 18 UNF.	CONNECTION PIECE FOR REFRIGERANT CYLINDER AND SEAL WITH QUICK-RELEASE COUPLING CONNECTION OR THREADED CONNECTION 5/8" - 18 UNF
Valve caps 5/8"-18 UNF.	VALVE CAPS WITH SPARE SEALS (FOR 5/8"-18 UNF THREAD)
Pressure gauge set with pressure reducer for nitrogen.	PRESSURE GAUGE SET WITH PRESSURE REDUCER FOR NITROGEN (MAXIMUM REDUCING PRESSURE: 15 BAR)
Quick-release coupling adapter for service connections, 2x included in scope of delivery of service station.	QUICK-RELEASE COUPLING ADAPTER FOR SERVICE CONNECTIONS
Open end wrench, size according to bolted joints at refrigerant pipes.	Not illustrated
Valve opener for charging hoses.	Not illustrated
Connecting nipple for conical seal 5/8"-18 UNF.	Not illustrated
Compressed-air gun with rubber mouthpiece.	Not illustrated
Hand shut-off valve 5/8"-18 UNF.	Not illustrated
Recycling container for refrigerant R134a.	Not illustrated
Digital thermometer	Not illustrated
Protective gloves	Not illustrated
Protective glasses	Not illustrated
Refrigerant R134a with cylinder (capacity as required).	Not illustrated
Nitrogen with compressed gas cylinder.	Not illustrated
Band wrench (oil filter) as counterhold for ribbed belt pulley.	Not illustrated