MULTIFUNCTION Buttons

Removing 

-- Remove the driver side airbag unit. Refer to Removal and Installation .

-- Remove the bolt -arrow-.

Fig 1: Identifying Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the button block.

-- Disconnect the connector -arrow- from the block of buttons.

Fig 2: Identifying Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing 

Install in reverse order of removal.

NOTE:

Make sure to route the wires between both blocks of buttons as illustrated -arrows-.

Fig 3: Locating Routed Wire

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Make sure the black connector is connected to the left block of buttons -arrow-.

Fig 4: Identifying Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Code the steering column electronic systems control module. Refer to [For transmission(s) 02E, 02Q, 09M] [For engine(s) CNNA, BLV, CCTA, CBFA] Diagnosis and Testing .