Telephone BASEPLATE In Center Console
Installed location of the telephone baseplate -arrow-.
Removing
Perform the following steps before starting:
-- Turn off the ignition and all electrical consumers and remove the key.
-- Remove the cellular telephone from the mount.
-- Open the center console and loosen both of the bolts -arrows-.
-- Remove the rear trim from the center console. Refer to Removal and Installation .
-- Unclip the connector upward out of the mount -arrow-.
-- Disconnect the connector -in the direction of the arrow-.
-- Carefully unclip the mount for the telephone upward -arrows- and guide out the wires upward.
Installing
Install in reverse order of removal.
NOTE:
When installing the wire, make sure there is enough clearance so as to avoid damaging the wiring harness.