Transmission Tightening Specifications

Transmission to Engine

Fig 1: Identifying Transmission Tightening Specifications

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Item	Bolt	Quantity	Nm
1	M12 x 55 With a long M8 threaded pin	1	80
2	M12 x 55 With a short M8 threaded pin or M12 x 50 Without threaded pin	1	80
3	M12 x 165 With an M8 threaded pin Also starter to transmission	2	80
4	M10 x 105	1	40
5	M10 x 50	2	40
6	M12 x 70 or M12 x 65	1	80
-	M6 x 8 Small flywheel cover plate (not present on all engines)	1	10

-A- : Centering alignment sleeves

Transmission Mount Bracket to Transmission

Fig 2: Identifying Transmission Mount Bracket To Transmission Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Replace the transmission mount bracket to transmission bolts -arrows-.

Tighten the bolts to 60 Nm + 90° (1/4) additional turn

Transmission Mount to Transmission Mount Bracket

Fig 3: Aligning Engine/Transmission In Installed Location

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Replace the transmission mount to transmission mount bracket bolts -arrows-.

Tighten the bolts to 60 Nm + 90° (1/4) additional turn