Rain/Light Recognition Sensor -G397-: Notes

WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

The rain/light recognition sensor can be installed again if it is not damaged when removing it from the retaining plate on the windshield (for example when replacing the windshield). If the windshield is cracked in the area near the rain/light recognition sensor, then the sensor cannot be used again.

Ensure that the removed rain/light recognition sensor is stored in a dust-free area and that the silicone connecting pads are not dirty.

If a rain/light recognition sensor is replaced with a rain/light recognition sensor with a different part number, the new rain/light recognition sensor must be coded. Refer to Rain/Light Recognition Sensor -G397-, CODING .

The rain/light recognition sensor cannot be optionally installed. For the correct rain/light recognition sensor.

CAUTION:

Turn off the ignition and all electrical consumers.
Remove the key.