Engine Speed Sensor -G28-: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal. Note the following:

Replace the seal
Lightly coat the seal with clean engine oil
Bolt -2- tightening specification: 8 Nm
Do not tilt the engine speed sensor -1- when installing otherwise it may get damaged.

-- Install the noise insulation. Refer to Description and Operation .