Amplifier -R12-, REMOVAL AND INSTALLATION: Notes

WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Familiarity with the function and operation is needed if there are customer concerns.

For additional information, refer to the Owner's Manual and appropriate Wiring Diagram.

Use the Vehicle Diagnostic Tester for servicing or fault finding.

Check all vehicle equipment (clock, convenience systems, etc.) after connecting the battery, refer to [For transmission(s) 0A4, 02E, 09G, 02Q] [For engine(s) CVCA, CDVB, CPRA, CBTA, CPKA, CKRA, CBUA] Removal and Installation and/or the Owner's Manual.

Remove the module carrier, refer to Remove the Module Carrier for the Amplifier -R12-
Connector assignment, refer to Connector Assignment Amplifier -R12- .
Read the measured values, refer to Amplifier -R12- Reading the Measured Values

Fig 1: View Amplifier -R12-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The Amplifier -R12- -1- enhances the sound of the Radios/RNS -RX1-.

The Amplifier - R12- -1- is a 10-channel amplifier.

The Radio/RNS -R12- speaker outputs control the signal inputs -2- on the Amplifier -RX1- -1-.

The Amplifier -R12- -1- is installed under the left front seat.