Amplifier -R12-, REMOVAL AND INSTALLATION: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Passat, 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

When installing, make sure the Amplifier -R12- -1- is pushed in correctly into the mount -2- on the module carrier.

Fig 1: Identifying Amplifier

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal.

-- Tighten the threaded connections to the tightening specification.

NOTE:

Make sure the cover is mounted correctly on the front edge of the module carrier when installing it.

Lock the cover by the left and right rear catches.