Magnet Installed Position, Checking

-- Remove the magnet -A- from the cover strip, for example, with a screwdriver.

Fig 1: Removing Magnet From Cover Strip, E.G. With Screwdriver

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the magnet from the screwdriver and place it permanently on the installed magnet.

Fig 2: Identifying Magnet & Cover Strip

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

When positioning it, the magnet -A- rotates by itself into the correct installed position and is attracted by the permanently installed magnet.

-- Now mark the side of the magnet that faces up -A- with a felt tip pen.

Fig 3: Identifying Magnet & Cover Strip

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the magnet into the cover strip -arrow- with the marked side up.

-- After inserting, ensure the retaining edges -arrows- lie on the magnet.

Fig 4: Identifying Signal Magnets & Cover Strips

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.