Vehicle Lift Mode Level Control System, Switching On And Off

Before vehicle is raised, level control system must be switched off.

In vehicle lift mode, level control system is switched off, in order to avoid an adjusting with set vehicle hoist or trolley jack.

Switched Off 

• The vehicle must be standing.

-- Switch the ignition on.

Fig 1: Identifying Switching Level Control System On And Off

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press and hold the LOCK  button in center console -arrow- for 5 seconds.

The "vehicle lift mode" is displayed inside the instrument cluster and indicator lamp in the LOCK  button will blink.

After activating, switch ignition off

Switched On 

Level control system can be activated by two variations again.

Fig 2: Identifying Switching Level Control System On And Off

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn on the ignition, then press and hold the LOCK  button in the center console -arrow- longer than 5 seconds.

or

-- If the vehicle is driven faster than 3 mph (5 km/h), vehicle level control is activated.