Cruise Control System

WARNING: This page is about a different car, the 2007 Volkswagen Touareg, 2006 Volkswagen Touareg, 2005 Volkswagen Touareg, and 2004 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Cruise Control System functions are controlled by the Engine Control Module (ECM).

Cruise control is operated with two button blocks in the multifunction steering wheel or, on vehicles without a multifunction steering wheel, with front rocker switch in windshield washer lever.

-- Perform assembly work at multifunction steering wheel. Refer to Removal and Installation .

-- Perform assembly work on windshield wiper lever. Refer to STEERING COLUMN SWITCH .

-- Cruise Control System can be activated/ deactivated. Refer to CRUISE CONTROL SYSTEM, ACTIVATING AND DEACTIVATING .

DTC Recognition and Display

DTC's in conjunction with Cruise Control System are transmitted via the ECM and via Steering Column Electronic Systems Control Module -J527-.

For troubleshooting, use Vehicle Diagnostic Tester in operating mode "Guided Fault Finding".