Safety Precautions

To reduce the risk of personal injury and/or damage to the fuel injection and ignition system, always observe the following:

• The ignition must be switched off before connecting or disconnecting injection and ignition system wiring or tester cables.
• If engine is to be cranked at starting RPM without starting:

-- Disconnect the electrical connectors from the ignition coils with power output stage.

If special testing equipment is required during road test, note the following:

• Test and measuring instruments must be secured to the rear seat and operated by a second person from this location.

If test and measuring instruments are operated from the front passenger seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered.