Vehicle Electrical System Control Module -J519-, Coding
WARNING: This page is about a different car, the 2007 Volkswagen Touareg, 2006 Volkswagen Touareg, 2005 Volkswagen Touareg, and 2004 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
The Vehicle Electrical System Control Module must be coded under the following conditions
- Changes were made to vehicle equipment.
- One particular functionality is to be changed.
- Vehicle Electrical System Control Module -J519- must be replaced.
Coding Vehicle Electrical System Control Module
-- Connect the Vehicle diagnostic tester. Refer to Description and Operation .
-- In Vehicle diagnostic tester, select operating mode "Guided Fault Finding".
-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Electrical Equipment
- 01 - On Board Diagnostic (OBD) capable systems
- Vehicle Electrical System Control Module
- Functions of Vehicle Electrical System Control Module
- Coding Vehicle Electrical System Control Module