Fuel Injection System: Notes
Observe Safety Precautions: FUEL INJECTION SYSTEM
Observe Clean Working Conditions: FUEL INJECTION SYSTEM
For all Motronic fuel injection system component locations.
For all Motronic fuel injection system removal/installation procedures and torque specifications.
All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through VW.
Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.
The manufacturers test box Test Box 105 Pin VAG 1598/42 is available for purchase or rental.
Technical Data
| Engine Code | BAR | |||
|---|---|---|---|---|
| Idle speed (not adjustable) | 600-700 RPM | |||
| Engine Control Module (ECM) | ||||
| System identification | Motronic MED 9.1 | |||
| Terminals at Engine Control Module (ECM) | 94 | |||
| Replacement part number | ||||
| Engine speed (RPM) limitation | approx. 6200 RPM | |||