Sound System Amplifier

View of removed amplifier:

Fig 1: View Of Amplifier

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Location in right of luggage compartment:

Fig 2: Identifying CD Changer -1- And Sound System Amplifier -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 - CD Changer

2 - Sound System Amplifier

Removing

Before starting repair work, perform the following:

-- Switch off ignition, switch off all electrical consumers and remove ignition key.

-- Remove center loading floor -A- in luggage compartment.

Fig 3: Identifying Center Loading Floor In Luggage Compartment

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove cover from lock carrier. Refer to Removal and Installation .

-- Remove tie-downs -arrows-.

Fig 4: Locating Tie Downs & Screw

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove screw -A- and remove right loading floor.

Fig 5: Locating Tie Downs & Screw

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove right D-pillar trim. Refer to Removal and Installation .

-- Remove screws -A- and unclip interior light -B- from trim.

Fig 6: Identifying Screws & Interior Light

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip trim from D-pillar in -direction of arrow-.

Fig 7: Identifying Trim Unclipped From D-Pillar

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip trim at side window in -direction of arrow-.

Fig 8: Identifying Removal/Installation Of Trim At Side Window

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully pivot trim -1- in -direction of arrow- so that amplifier/CD changer -2 and 3- can be reached.

Fig 9: Identifying Trim -1-, Amplifier -2-, And CD Changer -3-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove securing clips -arrows-.

Fig 10: Identifying Securing Clips -Arrows-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove amplifier in -direction of arrow-.

Fig 11: Identifying Removal Of Amplifier In -Direction Of Arrow-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disengage connectors at amplifier -arrows- and remove them.

Fig 12: Identifying Connectors At Amplifier -Arrows-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

When inserting amplifier on base plate, ensure grove at back of amplifier is slid in -direction of arrow- and fits under bracket -A-.

Fig 13: Identifying Bracket -A-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Remaining installation in reverse order of removal.