LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2009 >> Tiguan SE >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing - Automatic Transmission 09M >> 37 Controls, Housing >> Removal And Installation >> Transmission, Installing >> Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tightening Specifications

Fig 1: Transmission to Engine Bolts With Torque Specifications
GWWN37-10384Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. 1 - Direction of Travel
  2. - Drive Plate to Converter
    • 60 Nm
    • Quantity: 6, remove and install using the socket SW 15V/175
  3. - M12 Bolts
    • 80 Nm
  4. - M10 Bolts
    • 40 Nm
    • The bolts are located inside the lower flange
  5. Arrows - Alignment Sleeves


Fig 1: Transmission to Engine Bolts With Torque Specifications
GWWN37-10384Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. 1 - Direction of Travel
  2. - Drive Plate to Converter
    • 60 Nm
    • Quantity: 6, remove and install using the socket SW 15V/175
  3. - M12 Bolts
    • 80 Nm
  4. - M10 Bolts
    • 40 Nm
    • The bolts are located inside the lower flange
  5. Arrows - Alignment Sleeves
Component Nm
Transmission mount bracket to transmission (use new screws) 40 + 90° (1/4) turn
Transmission mount to transmission mount bracket transmission (use new screws) 60 + 90° (1/4) turn
Transmission fluid pipes to transmission 20
Ground cable to transmission mount bracket 25
Transmission to engine and bevel box Refer to BEVEL BOX
Bevel box to transmission
Right drive axle heat shield to bevel box
Front flexible disc heat shield
Driveshaft to bevel gear transfer case Refer to SPECIFICATIONS .
Control arm, pendulum support, drive axle Refer to Specifications .
Wheel bolts Refer to Specifications .
scientia non olet · About LEMON Manuals