Integrated Control Unit: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Volkswagen Routan, 2013 Volkswagen Routan, 2012 Volkswagen Routan, 2011 Volkswagen Routan, and 2010 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not to touch the sensor terminals on the HCU side or the contact pads on the ABM side as this may result in contamination and issues in the future.

-- Align components and install the ABM (1) on the HCU (2).

Fig 1: Identifying ABM, HCU And Solenoid Valve Stems

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the four screws (1) attaching the ABM (2) to the HCU. Tighten the mounting screws to 3 Nm (27 in. lbs.).

Fig 2: Identifying ABM Mounting Screws

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the ICU in the vehicle. Refer to INTEGRATED CONTROL UNIT .