Update Programming, Gateway Control Unit, Dash Insert Symbols Display Incorrect State (GROUP 01, NO. 10-01)

Publication date: 2010-01-26
Reference number: GROUP 01, NO. 10-01
Supersedes refnos: 2022585

UPDATE PROGRAMMING, GATEWAY CONTROL UNIT, DASH INSERT SYMBOLS DISPLAY INCORRECT STATE

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 01, NO. 10-01 (2022585), Date of Issue: January 26, 2010

VOLKSWAGEN:	2008 - 2009 Eos; 2008 - 2009 Golf, 2008 - 2009 GTI; Jetta, 2009 Jetta SportWagen; Tiguan
GROUP:	On-Board Diagnostic

APPLICABLE MODELS AND YEARS

Model(s)	Year	Eng. Code	Trans. Code	VIN Range From	VIN Range To
Eos	2008 - 2009	All	All	All	All
Golf, GTI	2008 - 2009	All	All	All	All
Jetta, Jetta SportWagen	2008 - 2009	All	All	All	All
Tiguan	2009	All	All	All	All

CONDITION

01 10 01 Jan. 26, 2010 2022585

Update Programming, Gateway Control Unit, Dash Insert Symbols Display Incorrect State

With the vehicle stationary, if the hazard lights are left on for a long time then switched off the following issues can occur:

Instrument cluster warning symbols remain on.
Closed doors are shown as open.
The closed deck lid is shown as open.
If the electronic parking brake is switched on, it cannot be switched off.

TECHNICAL BACKGROUND

Incorrect software in the Gateway Control Unit.

PRODUCTION SOLUTION

Gateway Control Unit software updated beginning model year 2010.

SERVICE

UPDATE-PROGRAMMING PROCEDURE

Tip: To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 "Software Version Management".

The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim.

Update the Gateway Control Unit using the SVM Unit Code as listed in the table below:

SOFTWARE INFORMATION

Old Software Part No.	Old Software Version	New Software Part No.	New Software Version (or higher)	SVM Unit Code
1K0.907.530.L	0052	1K0.907.530.AD	0111	328C
1K0.907.530.N	0052	1K0.907.530.AE	0111	328C
1K0.907.530.Q	0060, 0061, 0062, 5063	1K0.907.530.AD	0111	328C
1K0.907.530.R	0060, 0061, 0062, 5063	1K0.907.530.AE	0111	328C
1K0.907.530.S	0070, 0071	1K0.907.530.AD	0111	328C
1K0.907.530.T	0070, 0071	1K0.907.530.AE	0111	328C
1K0.907.530.AA	0081	1K0.907.530.AD	0111	328C
1K0.907.530.AB	0081	1K0.907.530.AE	0111	328C
1K0.907.530.AD	0110	1K0.907.530.AD	0111	328C
1K0.907.530.AE	0110	1K0.907.530.AE	0111	328C

The procedure can be found in GFF under Functions/Component Selection, Software Version Management, Adapting Software.

WARRANTY

WARRANTY INFORMATION

To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual ⁽¹⁾

Model(s)

Year(s)

Eng. Code(s)

Trans. Code(s)

VIN Range From

VIN Range To

Eos

2008-2009

All

Golf, GTI

2008-2009

All

Jetta, Jetta SportWagen

2008-2009

All

Tiguan

2009

All

Claim Type:

Use applicable Claim Type ⁽¹⁾

SAGA Coding

Service Number:

Damage Code

HST

Damage Location (Depends on Service No.)

Parts Manufacturer (removed part)

9035

0039

Use applicable when indicated in ElsaWeb (L/R)

S J 8 ⁽²⁾

Labor Operation ⁽³⁾ : Program Gateway Control Unit

9035 2599 = 20 TU

Labor Operation ⁽³⁾ : Charge Battery

2706 8950 = 10 TU

Diagnostic Time ⁽⁴⁾

GFF Time expenditure

01500000 = 00 TU max.

Road Test

01210002 & 01210004

Technical Diagnosis

0132xxxx = 00 TU max.

Claim Comment: Input "As per Technical Bulletin 2022585" in comment section of Warranty Claim.

⁽¹⁾	Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only

⁽²⁾	Code per warranty vendor code policy.

⁽³⁾	Labor Time Units (TUs) are subject to change with ELSA updates.

⁽⁴⁾	Documentation required per Warranty Policy & Procedures Manual.

REQUIRED PARTS AND TOOLS

No special parts required.

TOOL INFORMATION

Tool Description	Tool No:
Midtronics Battery Tester/Charger	InCharge 940 (INC-940)
VAS Diagnostic Tool	VAS 5051B, 5052/A, 6150 (Base CD V15.00 and Brand CD V15.96 or higher)

ADDITIONAL INFORMATION

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.