Fastener Tightening Specifications
| Component | Fastener Size | Nm | ||
|---|---|---|---|---|
| Oil Baffle to Upper Oil Pan Bolt | - | 9 | ||
| Oil Cooler to Accessory Bracket Bolt | - | 15 | ||
| Oil Drain Plug to Lower Oil Pan (1) | - | 30 | ||
| Oil Filter Element to Accessory Bracket | - | 22 | ||
| Oil Pressure Switch to Accessory Bracket | - | 20 | ||
| Oil Pump Drive Chain Tensioner Guide Pin to Cylinder Block Bolt | - | 9 | ||
| Oil Pump to Upper Oil Pan Bolt | ||||
| M6 | 9 | |||
| M8 | 20 | |||
| Oil Suction Pipe to Oil Pump Bolt | - | 9 | ||
|
||||
Lower Oil Pan Bolt Tightening Sequence and Specification
-- Tighten the bolts -1 through 20- in 3 passes as follows:
- Tighten the bolts hand tight
- Tighten the bolts to 8 Nm
- Tighten the bolts an additional 45° (1/8) turn
Upper Oil Pan Bolt Tightening Sequence and Specification
-- Tighten the bolts -1 through 14- in 3 passes as follows:
- Tighten the bolts hand tight
- Tighten the bolts to 15 Nm
- Tighten the bolts an additional 90° (1/4) turn
Oil Separator Bolt Tightening Sequence and Specification
-- Tighten the bolts in sequence -1 through 9- to 9 Nm.