Test Step 9 - Check the Latch Secondary Position Sense Circuit for an Open

Fig 1: Latch Secondary Position Sense Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Disconnect the power liftgate module C2 harness connector.
• Measure the resistance of the latch secondary position sense between the power liftgate module C2 harness connector and the power liftgate latch harness connector.
• Wiggle the harness while observing the ohmmeter.

Is the resistance less than 2.0 ohms?

No

• Repair the latch secondary position sense circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

Yes

• Go to Test Step 10 Test Step 10 - Latch Secondary Position Sense Wire Short to Voltage